BQ-CC65 BQ-CC65

BQ-CC65 BQ-CC65

Product information

Information-Rich Battery Status LCD

Information-Rich Battery Status LCD

A full battery management solution to protect and care for your eneloop investment.
LCD Status shows voltage/operation time remaining; an Eco Counter (number of batteries saved); End of Life advanced warnings; Abnormality Detection for incompatible batteries; Maintenance Mode information; and Discharge Function including battery condition. Intuitive information to prevent device downtime while extending battery performance.

Charge mobiles via USB port (DC OUT)

Charge mobiles via USB port (DC OUT)

Plug your charger to an AC cable and connect your smartphone via USB cable* to charge your device.
*USB cable sold separately.

Refresh (Discharge) Function / Maintenance Charging

Refresh (Discharge) Function / Maintenance Charging

Batteries are gently charged, drained to check their condition, and refilled, refreshing your eneloop batteries.
Maintenance Charging checks for batteries that have been over-discharged or overheated, and switches individual batteries to an appropriate charging mode to restore performance.
Charge speed is regulated to stop overheating, while roll-off approaching full capacity is gentle to prevent overcharging.

Other benefits

  • Displays Battery Status on LCD, during Charging and Discharging
  • Shows Capacity, Voltage, Time, and Wh
  • Features Refresh (Discharge) Mode
  • Input type: AC
  • Charges Mobile Devices via USB Port
  • Rapid charging
  • Charging Time: Approx. 1.5 Hours (eneloop AA x 1 to 2), Approx. 3 Hours (eneloop AA x 3 to 4), Approx. 2 Hours (eneloop pro AA x 1 to 2), Approx. 4 Hours (eneloop pro AA x 3 to 4)
  • Accepts AA x 1 to 4 / AAA x 1 to 4
  • Individual control
  • Smart Charge: Detects voltage and stops charging before overflow for longer battery life.
  • Auto voltage
  • Dimensions: 88 (W) x 147 (L) x 40 (H) mm
  • Weight: 225 g (Excluding AC cord)

Sales by Country

CIS,Europe

Technologies

How to Use

Charge : Step 1

Place batteries in the slots according to the polarity position (+/-) indicated on each slot.

WARNING

If a AAA battery is inserted from the (+) end first, the (-) terminal on the charger might be damaged.

Charge : Step 2

Each battery is charged individually.
You can charge any combination of four pieces of AA/AAA batteries.

Charge : Step 3

Plug the charger into a standard 100-240V AC outlet.
The battery indicators blink as diagnosis of the current battery charge starts.

Charge : Step 4

Check the LCD screen.
The total number of batteries charged will be displayed.
Charging Status is displayed.

Charge : Step 5

When charging is complete. "FULL" is displayed.

REFRESH function : Step 1

Insert batteries and press the REFRESH button for about 1 second.
After discharging is complete, charging starts. When charging is compete, "FULL" is displayed.

REFRESH function : Step 2

required time: Approx. 13 hours for 4 AA (1900 to 2000 mAh) batteries

USB output function : Step 1

You can use CC65 as an AC adapter. (It does not allow you to use the batteries in the charger as a power supply.) Connect the charger to a standard 100 to 240V AC outlet.
Connect a USB Type A cable (not included) to the USB-OUT port.

USB output function : Step 2

Press the USB OUT button to start ourput.

Related Charger